Tak jsem koupil Micromys, ale nadseni brzy opadlo. Po 14ti dnech jsem dostal mail, že mám poslat zpět. První várka měla řadu chybek. Nyní koupené by už měly být opravené. Psal jsem Jensovi Schönfeldovi, co že za chybky to je a jestli má smysl to posílat zpět. Tady je část jeho odpovědi:
"There are multiple changes to the hardware and to the firmware that were needed because of problems that customers were reporting. Some mouse models were incompatible, the biggest KVM switch manufacturer "MasterView" was incompatible and the right mouse button does not work if the Amiga is operated at over-voltage. Although the latter is clearly a fault of the power supply (and shortens the life of the Amiga), it seems to be quite common in Europe. All these problems are solved with a combination of hard- and firmware upgrade that can only be installed at the factory."
Třeba se tahle informace někomu hodí pokud ne, prosím přesunout do chlívku.
Díky.
"There are multiple changes to the hardware and to the firmware that were needed because of problems that customers were reporting. Some mouse models were incompatible, the biggest KVM switch manufacturer "MasterView" was incompatible and the right mouse button does not work if the Amiga is operated at over-voltage. Although the latter is clearly a fault of the power supply (and shortens the life of the Amiga), it seems to be quite common in Europe. All these problems are solved with a combination of hard- and firmware upgrade that can only be installed at the factory."
Třeba se tahle informace někomu hodí pokud ne, prosím přesunout do chlívku.
Díky.
Komentovat